LW20 White 1200mm x 800mm Hydro Shower Cabin

Home»Products»»LW20 White 1200mm x 800mm Hydro Shower Cabin

RRP £1899

The LW20  is a 1200 x 800 Offset Quadrant Shower cabin that does not require any grouting or tiling, simply install the shower in your space, connect to the water & power and your shower is complete.

At 1200mm x 800mm It will sit perfectly in the corner of your bathroom, and whilst it has a compact footprint the sense of space inside is in no way diminished.

The key features of your shower are below, please do contact us if you would like any further information, on why the Lisna Waters Hydro Shower Cabin Range are the best Hydro Showers in the UK.

Where To Buy »Control Panel Manual»Installation Manual»Register Your Warranty »


Product Features

Easily control your shower using the latest touch control design of controller.

Modern Black or White 5mm toughened safety coloured glass to brighten your bathroom now comes with our unique LW Elegence Easy Clean Glass Protection

Optional Shower Stool with stainess steel frame this shower seat offers style.

Bright and easy to clean, the Chrome finish works in any bathroom to add style.

Helps protect against any surges of hot water.

Abba to ZZ Top, use your phone to bring music to the shower.

For that luxury rainforest waterfall experience.

Great for washing your hair or anywhere else!

The Chromatherapy lighting in this shower is as practical as it is beautiful, just perfect to relax in.

Control where the jets direct their magic, soothe those aching muscles.

With Stainless Steel Support Beams Build Quality to ensure your shower lasts!

Includes Flexi Hose & Waste with 0.9m Flexi Pipes for Hot & Cold Water Inlets.

Stops the unit becoming too stuffy during use.

Allows you to store your shampoo and shower gels safely.

6 Yr Parts Warranty upon registration, you must register your warranty within 120 days of delivery to qualify for free extended guarantee

Shower Dimensions

  • Width: 1200mm
  • Depth: 800mm
  • Height: 2180mm
View full spec for this Shower 6-year-guarantee

ISO 9001

CE Quality Approved

  • Installation Guidelines
  • We highly recommend that 100mm clearance must be allowed for between the cabin roof and ceiling to allow adequate venting and to enable the roof to be installed with ease. It is also an essential required to ensure that a fully qualified electrician and fully qualified plumber install the unit in accordance with current regulations. The product requires hard wiring into the mains, and comes pre-fitted with an RCD Unit and Plug only for testing purposes by your assembler

    We Highly Recommend Pressure Equalising Valve for use with Combi Boilers to Ensure Balanced Hot & Cold water is supplied to shower unit.

  • Additional Installation Notes
  • Water supply requirement: separate hot and cold inputs are required, each at a pressure of 1.5 – 3 Bar. NB: if the water pressure is below this range a twin negative head pump must be used to boost the hot and cold supply.

    A pump must not be used on the output of a combi boiler.

    Electrical: This steam shower cabin requires 1 x 13amp electrical supply. It comes with a plug and RCD fitted, however we recommend you remove the plug and have the cabin installed to a fused spur. If you have an RCD fitted within your mains board you may also remove the RCD fitted to the shower flex.

    Water: The cabin requires 1 x hot and 1 x cold water supply. The household water pipes should be fed to a point approximately 1 metre off the floor in the corner where the cabin is to be fitted. Balanced water pressure is required, between 1.5-3 bar. If using a gravity fed system we recommend you use a shower pump, to provide the required water pressures. We do not supply shower pumps.

    The shower cabin is a freestanding product and as such we would recommend your fitter does not fit the shower into locations that mean the cabin cannot be moved away from the wall if needed. Please ensure you have 300mm free space either side of the shower for assembly and servicing purposes The couplings on the cabin to connect to your water supply are standard 15mm compression fittings.

    Some of our products arrive in large boxes, please ensure that you have enough room to manoeuvre the boxes and their contents to the installation location.

    *Radio reception is dependant on area and availability. Please be aware before purchasing, We offer no guarantees regarding the radio reception in their range of steam showers.

    **Please note that due to constant improvements slight differences can occur when compared to images used such as control panel but all features are generally the same and are normally improved upon as a result in changes.

  • Tech Specs
  • > Operates at Pressures of 1.3 – 3.5 Bar we recommend the Salamander ESP75 2.2 bar shower pump if you need to increase you water pressure
    > Flow rate of 12/14 litres per minute minimum required
    > We Highly Recommend Pressure Equalising Valve for use with Combi Boilers to Ensure Balanced Hot & Cold water is supplied to shower unit.
    > Dimensions: 1200mm x 800mm x 2180mm

    Related Products