LW31 800mm x 800mm White Quadrant Hydro Shower Cabin
Lisna Water's LW31 is a 800 x 800 Quadrant hydro shower cabin that features a white glass backing. Lisna Waters showers do not require any grouting or tiling, simply install the shower in your space, connect to the water & power and your steam shower is complete and ready for you to enjoy.
At 800mm x 800mm the LW31 will sit perfectly in the corner of your bathroom and whilst it has a compact footprint the sense of space inside the steam shower cabin is in no way diminished.
- 800mm x 800mm with white glass back panels
- 6 Back Massage Jets
- Height: 2185mm
- Touch Control Panel
- Easy Clean Protection
- Shower Valve with Vernet Element
- Thermostatic Sensor
- FM Radio
- Bluetooth Connection
- Designer Top Rain Shower
- Handheld Shower and Slide Rail Kit
- Chromatherapy Lighting
- EasyPlumb Kit
- Free Fitting Kit
- Circular Fan + Speaker System
- Modern Glass Shelves
- Lisna Waters 2 Year Guarentee
- Fully European CE Approved
- Industry Standard ISO 9001
- Receive Wooden Stool as Free Gift
- Operates at Pressures of 1.3 3.5 Bar we recommend the Salamander ESP75 2.2 bar shower pump if you need to increase you water pressure
- Flow rate of 12/14 litres per minute minimum required
- We Highly Recommend Pressure Equalising Valve for use with Combi Boilers to Ensure Balanced Hot & Cold water is supplied to shower unit.
- Please see www.lisnawaters.co.uk for full fitting instructions and more technical information.
- Additional Info
Large steam rooms allow the occupant to sit or stand at a comfortable distance from the steam outlet whilst enjoying the steam facilities. In order to offer the same steam facilities but within a smaller shower cabin footprint the location of the steam outlet pod may be close to the occupant. Care must be taken when using the steam function to avoid scalding. Children should NOT use the steam within the product unless under strict adult supervision.
Electrical: This steam shower cabin requires 2 x 13amp electrical supply. It comes with a plug and RCD fitted, however we recommend you remove the plug and have the cabin installed to a fused spur. If you have an RCD fitted within your mains board you may also remove the RCD fitted to the shower flex.
Water: The cabin requires 1 x hot and 1 x cold water supply. The household water pipes should be fed to a point approximately 1 metre off the floor in the corner where the cabin is to be fitted. Balanced water pressure is required, between 1.5-3 bar. If using a gravity fed system we recommend you use a shower pump, to provide the required water pressures. We do not supply pumps. The steam cabin is a freestanding product and as such we would recommend your fitter does not fit the shower into locations that mean the cabin cannot be moved away from the wall if needed. The couplings on the cabin to connect to your water supply are standard 15mm compression fittings.
Some of our products arrive in large boxes, please ensure that you have enough room to manoeuvre the boxes and their contents to the installation location.All Measurements and weights are for guidance only. Package dimensions may change without notification. Whilst every effort is made to ensure this information is kept up to date, design and features are subject to change without notification.
*With Lisna Waters you automatically get a 2 year parts guarantee, if you register your model on our website you will receive a free extended parts guarantee up to 6 years, within 120 days of delivery of your product.
Recommend to a friend